SOLAR-POWERED PEDESTRAIN SIGNALS Lighting the Future
LED light
SOLAR-POWERED PEDESTRAIN SIGNALS
SOLAR-POWERED SYNCHRONOUS FLASHING PAVEMENT SIGNAL

SOLAR-POWERED PEDESTRAIN SIGNALS


FEATURES:

Using the off grid solar power system without power lines to provide power.

Using wireless control technology, pedestrian lights can be synchronized with controller output.

Even if in cloudy or rainy days, the system function can last for at least 3 days.

太陽能行人號誌燈
SPECIFICATION
WIRELESS TRANSMISSION MODULE
Power Input 5 VDC
Frequency Band RF LoRa Band: 915 ±13 MHz
Operating Temperature -10~+70 ℃
CPU 8-Bit Microcontroller
Transmission Distance in an outdoor, unobstructed environment, an effective distance up to 500 m
Group Identification Setting can set identification codes of different groups (support 10,000 groups)
Number of the Same Group Devices support up to 120 sets for the same groups
Firmware Update Communication Port need to have a port to support on-site update
RS485 Packet Format need compatible format with the controller, and can provide real-time seconds wireless transmission to the pedestrian signals
Digital I/O Interface at least 10 sets of digital I/O pins, and support the following functions:
  1. RS232*1 (Tx/Rx)
  2. RS485*1 (Tx/Rx)
  3. SPI*1
  4. I2C*1
Analog Input Interface at least 3 sets of analog input
Watchdog self-detection will reboot automatically

SOLAR CHARGE AND DISCHARGE SYSTEM
Solar Module ≧ 150 W
Secondary Battery deep cycle 100Ah / 12V
Operating Temperature -40~+60 ℃
Solar charging status and battery capacity can be indicated by LED.
During the daytime, the system can charge (secondary battery) and discharge (pedestrian light) at the same time.
When secondary battery is low battery (abnormal), the load end can disconnect automatically.
Charge and discharge module is an Epoxy package that prevents moisture and dust.

Using the solar power and energy storage system equipment can achieve full power supply spontaneously, and does not require another power line installation to provide power.

Using IoT wireless technology, red and green lights of pedestrian light can be synchronized switch with controller output.

Even if in cloudy or rainy days, the system function can last for at least 3 days.

SOLAR-POWERED SYNCHRONOUS FLASHING PAVEMENT SIGNAL


FEATURES:

Built-in GPS module ensures synchronized flashing.

Charging under sun in daytime around 8 hours provides 72-hr operating time.

Operating Temperature -10~+70 ℃
Visual Range > 100 m
Lamp Box aluminum alloy
太陽能同步閃光地埋燈
SPECIFICATION
Model
Light Source ∅10 high power LED
Color red, yellow, blue, white, and green
Synchronized Flash ≧ 60 times/min
GPS built-in GPS module ensures synchronized flashing

Solar Panel single crystalline silicon solar panel 5V / 0.3W
Battery Capacity 1,400 mAh / 5V rechargeable lithium battery
Operating Time charging under sun in daytime around 8 hours provides 72-hr operating time

Battery charge in daytime, LED does not flash. Battery discharge at night, LED can be synchronized flashing.